QS-360 Hydraulic Multi-functional Drill Rig

The hydraulic multi-functional drill rig, as a specialized piece of equipment for infrastructure construction, features low energy consumption, high efficiency, and versatility. With fully hydraulic control, it offers convenient and flexible operation. The rig has multi-joint linkage, allowing it to adapt to various construction angle requirements. This equipment is highly mobile, saving time, effort, and reducing hassle. The hydraulic multi-functional drill rig is equipped with a rotary impact power head that is independently developed and continuously upgraded by our Company. This power head integrates efficient rotation and high-frequency impact into a single structure, providing stable performance.

The hydraulic multi-functional drill rig is widely used in various engineering projects, including anchoring for anti-floating anchor rods, reinforcement of highway and railway slope treatments, micro-pile drilling, dewatering wells, deep excavation support, roadbed reinforcement, metro grouting, tunnel pipe shed advance support, hydropower engineering dam reinforcement and seepage prevention treatment, drainage holes, and blasting holes in mines and quarries.

Inquire Now Contact Us

Features Main Technical Parameters

Features

The rotary impact power head perfectly combines a high-torque rotating motor with an efficient hydraulic impactor. During drilling, the drill rod casing rotates and impacts simultaneously, allowing it to adapt to various complex formations. This enables rapid drilling and hole formation in challenging layers such as gravel, fractured, and backfill layers. Additionally, the rotary impact power head features an anti-impact function. When jamming occurs during drilling, the drill rod casing can be impacted in reverse to ensure smooth retrieval of the drill rod casing. The rotary impact power head is also designed with a thread compensation mechanism, which reduces the operational difficulty when replacing drill rods and casings. This mechanism protects the threads of the drill rods and casings, effectively extending their service life. Additionally, it prevents severe impacts on the hydraulic system during the replacement of drill rods and casings. The hydraulic system of this drill rig adopts a load sensing variable system, ensuring the efficient utilization of the engine and hydraulic pump, and improving the stability of the hydraulic system. With its powerful performance, high torque, large impact force, and flexible operation, this drill rig demonstrates excellent efficiency in construction.

Main Technical Parameters

名称Description			单位 U n i t	QS360
发动机 Engine	发动机型号Model			Perkins1206J-E70TTA
	发动机额定功率/转速Rated power/speed		kW	168/(2200r/min)
	发动机最大扭矩Max.Torque		N.m	1092Nm(1400r/min)
	燃油箱容积Fuel tank capacity		L	260
动力头 Rotary head (HB-520)	低速档 low operation	动力头最大扭矩Max.Torque	N.m	16000
		动力头转速Rotate speed	r/min	42
	高速档 fast operation	动力头最大扭矩Max.Torque	N.m	8000
		动力头转速Rotate speed	r/min	84
		最高转速Max.speed	r/min	136
液压系统 Hydraulic system	主泵最大工作压力MainpumpMax pul-down piston push		Mpa	28
	主泵流量Main pump		L/min	180+180
	副泵流量Auxiliary pump		L/min	20+16
	液压油箱容积Hydraulic oil tank capacity		L	400
卷扬 Winch	最大提升力Line pull(1st layer)		kN	10
	最大单绳速度Maximum rope speed		m/min	30
	钢丝绳直径Rope diameter		mm	12
	卷筒容绳量Rope capacity		m	40
进给装置 Hoist &Feed system	进给型式Feed type			马达+链条(Motor+chain)
	进给行程Feed stroke		mm	4800
	最大起拔力Maximum hoist pull		kN	100
	最大进给力Maximum feed force		kN	100
	最大起拔速度Maximum hoist pull speed		m/min	40
	最大进给速度Maximum feed speed		m/min	40
底盘 Undercarriage	最大行走速度Travelling speed		km/h	3
	最大爬坡度Max.climbable gradient of the overall unit		°	26.5
	履带板宽度Track shoe width		mm	500
	履带外宽Over all width		mm	2250
	履带总长Overall length		mm	3450
	平均接地比压Average ground pressure		kPa	66
夹具 Clamps	夹持范围Nominal size		mm	60-300
	夹持力Maximum Clamping force		kN	300
	卸扣扭矩Maximum breaking torque		kN ·m	45
运输状态钻机尺寸(长宽高)Dimension in transport condition (LxW×H)			mm	10300×2260×2900
整机重量(标配)Weight of overall unit(standard configuration)			Kg	18800